Is there light at the end of the tunnel?

I'm finally starting to out things together. Tonight I spent a quick hour welding in the inner rocker. My welds aren't the prettiest, but I'm getting better and there is good penetration. If it breaks, I'll just weld it again. 

I also drilled and bolted it to the mid mount at the other end. I dunno if those two part are 'supposed' to be joined, but they line up and I used a tiny bolt so that I could take it apart if I needed to shim it or change the alignment. I also trimmed the floor patch a bit and test fit it. I'll do some finish trimming and need to cut a new lip before I weld it in place.