Today I took the plow motor off the pump unit to see if I couldn't get it going. Boy was it crappy inside. Clearly water got in at some point. But it actually cleaned up nicely. I had to resolder one of the brushes back on and the brush mounting plate broke, but was able to wedge it back in place. Got it all cleaned up as best I could, put it back together and bench tested it... Voila! it works! Now to take it apart again, lube, reassemble and put back on the pump. Still think that one of the solenoids is bad, but hopefully, this will keep the unit from being a boat anchor.
No comments:
Post a Comment